- Wood Sign
- Heat Transfer Vinyl, I used these that I bought from Amazon
- Parchment Paper, I didn’t have parchment paper so I used a coffee filter
These wood hangers are from Hobby Lobby and I bought these vinyl signs from Amazon. These two seemed to be a good fit for the hangers.
I used a coffee filter instead of parchment paper for ironing. I put the iron on the highest temperature and pressed it on the sign in 15 second intervals. Be careful to not burn yourself or the sign. I did have to put some pressure on the iron when it was on the sign. You can periodically test it to see if the vinyl is sticking to the sign by peeling off the plastic. The plastic will be hot so be careful!
When the whole vinyl piece is stuck to the sign you can peel off the whole piece of plastic. Then you have a cute sign!! 🌻
2 thoughts on “Vinyl Wood Sign”
These are beautiful